Resetting System Parameters; Standard Cmos Setup - NEC VERSA SXI Manual

Resetting System Parameters

To reset all parameters to the default settings, highlight and press
Configuration with Defaults from the BIOS Setup Main Menu. Use the arrow keys to
select
Yes

Standard CMOS Setup

Use the Standard CMOS Setup screen to view the System Time, System Date and to
modify drive parameters and related settings.
Parameter
Date
System Memory
Time
Diskette Drive A
Internal
VersaBay
Boot Sector Virus
Protection
Date — Sets your NEC Versa's calendar month, day and year. These settings
!
remain in memory even after you turn off system power.
To set the date use the
or PgDn
System Memory — Displays the amount of system memory currently installed in
!
your system.
Time — Sets the time, enter the current hour, minute, and second in hr/min/sec,
!
24-hour format.
To set the time use the
or PgDn
Diskette Drive — Designates the drive type for your diskette drive.
!
Internal Devices — Assigns devices to the internal drive and VersaBay device in
!
your system.
and press .
Enter
Standard CMOS Setup
Default Setting
mm/dd/yyyy
hh/mm/ss
1.44 MB, 3 1/2
Auto
Auto
Disabled
Tab
key to change the numbers within each field.
Tab
key to change the numbers within each field.
or arrow keys to move from field to field. Use the
or arrow keys to move from field to field. Use the
Using the BIOS Setup Utility 3-5
to select Auto
Enter
Alternate Setting(s)
(automatically detected)
Not installed
CD/DVD, SuperDsk, Not
Installed, User Defined
CD/DVD, SuperDsk, Not
Installed, User Defined
Enabled
PgUp
PgUp