Cd Care; Changing The Auto Play Setting - NEC VERSA SXI Manual

CD Care

When handling CDs, keep the following guidelines in mind.
Always pick up the disc by its edges.
!
Avoid scratching or soiling the side of the disc that has no printing or writing on it.
!
This is the data side of the disc.
Do not write on or apply labels to either side of the disc.
!
Keep the disc away from direct sunlight or high temperatures.
!
Clean fingerprints or dust from the disc by wiping it with a soft cloth. Gently brush
!
the cloth from the center of the disc toward the edge.
repellent, or any other chemical on the disc. Chemicals and cleaners can damage the
disc.

Changing the Auto Play Setting

Your system's shipping configuration may not allow a CD to automatically play upon
insertion. Although this feature makes using your CDs very convenient, it may interfere
with the system's power management function.
Follow these instructions to enable or disable the Auto play feature.
From the Windows 98 Start menu, select Settings and Control Panel.
1.
2. In the Control Panel, highlight and double-click the System icon.
3. Select the Device Manager tab.
Locate and open the CD-ROM folder.
4.
5. Highlight the appropriate CD-ROM line.
6. Press the Properties button at the bottom of the window and select the Settings tab.
Proceed as follows:
7.
!
!
5-8 Using the System Drives and Bays
Avoid using benzene, paint thinner, record cleaner, static
To enable Auto Play, click to add a check mark next to the line "Auto insert
notification."
To disable Auto Play, click to remove the check mark next to the line "Auto
insert notification."