Powering On Your System; Powering On With Windows 2000 - NEC VERSA SXI Manual

adapter clear of objects lets the adapter cool properly during use.
Only use the AC adapter that comes with your NEC Versa SXi. Although other adapters
look similar, using them can damage your system.

Powering On Your System

Power on the system as follows:
1. Locate the latches on the left and right side of the LCD panel, slide them toward
the front of the system, and raise the panel.
2. Locate and press the Power button to turn on system power. For additional
information about Power control buttons and power LEDs, refer to Chapter 1,
"Introducing Your NEC Versa."

Powering On with Windows 2000

If you installed a generic Windows 2000 operating system or disabled hibernate
support, a message about the hibernation file appears at power on. Enable Hibernate
support to remove this message.
Follow these steps to enable Hibernate support:
1. On the Windows taskbar, click Start, Settings, and Control Panel.
Double click Power Options.
2.
Select the Hibernate tab.
3.
4. Check the box to enable Hibernate support.
Click OK and close Control Panel.
5.
2-4 Getting Started
Do not cover or place objects on the AC adapter. Keeping the