Powering The System On And Off - NEC Versa User Manual

Power Sources
lets the adapter cool properly during use.
only use the AC adapter that comes with your Versa. Although other adapters look
similar, using them can damage your system.

Powering The System On and Off

To power on, locate the power button
For more information on how to power off the system, refer to the
system.
Caution:
this equipment uses an ungrounded power cable. Replace the cord if it becomes damaged. The
cord must be rated for at least 250VAC at 10 amps, and must indicate international safety agency approval.
The plug must be a type appropriate for the country where it is used. Check with your local dealer for HAR
type 18 AWG, 2 conductor cord, or better. Obtain replacement cords at an authorised service centre. The
replacement must be of the same type and voltage rating as the original cord.
above the keyboard and press it.
'Tips' section relevant to your operating