Auto Configuration With Defaults; Save Settings And Exit; Exit Without Saving; Using Setup To Set Power Management - NEC VERSA 6050MH Service Manual

Auto Configuration with Defaults

Loads or cancels default settings.

Save Settings and Exit

Accepts changes made to current, or default settings and exits Setup.

Exit Without Saving

Reverts to previously selected settings and exits Setup.

Using Setup to Set Power Management

As you have seen in this chapter, Setup allows you to use the factory set power savings
level (Longest Life), or choose between High Perform, Custom, or Off. Each provides a
special value to your current work effort. These power management levels have been de-
signed with you in mind. For example, you can use them under the following circumstances:
T
Longest Life — Provides best battery life and good performance. Use while
traveling long distances.
T
High Perform — Provides best performance and good battery life. Use while on
the road, traveling short distances.
T
Custom — Set power management levels according to your own needs and pres-
ent environment.
T
Off — Office environment, using AC power.
See the online documentation in the Windows NEC Information group for a lengthier dis-
cussion of Power Management. See the following section for information on how using the
special Save to File (STF) feature can benefit you.

Using the Save to File (STF) Feature

STF is a feature that protects the integrity of your working files. For example, if you get ur-
gently called away from your NEC Versa without saving current data, your system auto-
matically goes into Suspend mode. After 30 minutes pass, and you don't return, your
working environment is saved to a special file on your hard disk.
There are two ways to set your NEC Versa's STF feature. One method is via the Setup
utility. Select Power Management from the Setup Main Menu. Move the cursor down and
highlight Suspend Mode. Press the PgUp key and select STF. Save the settings and exit
Setup.
The second method is to press Fn Suspend simultaneously, before you leave your NEC
Versa. This function initiates STF on demand.
Setup and Operation 2-31