Using The Restore Cd - NEC VERSA 6000 Manual

MESSAGE
Keyboard clock line
failure
Keyboard data line
failure
Keyboard controller
failure
xx Key Stuck
Keyboard Error

USING THE RESTORE CD

If you are running the Windows 95 operating system, you can use theWin-
dows 95 Restore CD that comes with your NEC Versa 6000 to restore sys-
tem software.
If you selected the Windows for Workgroups operating system and want to
complete the Restore procedure, you need to exchange the Windows 95 CD
that ships with your system for the appropriate Windows for Workgroups
Restore CD. Call the NEC Diskette Fulfillment Center at 1-800-842-6446
for information on receiving the Windows for Workgroups Restore CD.
The Recovery CD gives you the following two options if you experience file
corruption or loss of applications due to a system failure:
File Recovery
POST Error Messages
WHAT TO DO
The hard disk controller does not work and might
need repair.
Unplug external keyboard if attached. Have the
keyboard repaired.
Unplug external keyboard if attached. Have the
keyboard repaired.
Unplug external keyboard if attached and reboot the
system. If it still fails, have the system repaired.
NOTE
Repeated keystrokes during boot may
produce an error message .
A key is jammed. Remove any obstruction you find.
You may have repeatedly pressed the F2 key when
trying to enter Setup.
If the error message remains, the keyboard may
need repair.
Solving Problems 7-5