Using Keys - NEC VERSA 6000 Manual

Item-Specific Help
The right part of the screen. This area describes each parameter and its
available settings.
Key Status Bar
The bottom part of the screen. These lines display the keys available to
move the cursor, select a particular function, and so forth.

Using Keys

The following table lists Setup keys and their functions.
KEY
Home/End
PgUp/PgDn
Enter
Tab
–/+
F5/F6
F9
F10
Esc
F1
Setup Key Functions
WHAT IT DOES
Chooses a selection from the menu bar.
Moves to the first/last parameter on the current screen.
Displays the previous/next page of the current screen if
scrollable.
Moves the cursor between the displayed parameters.
Displays additional fields for parameters marked with a
For some parameter settings, moves the cursor between the
subfields. For example, for System Time, Tab moves the
cursor from hour to minute to second.
Selects the next lower/higher setting. (Same as F5/F6.)
Selects the next lower/higher setting. (Same as
Selects the default settings for the displayed parameters only.
Selects the settings of the displayed parameters as they were
upon entering the screen.
Displays the Exit screen.
Displays the General Help screen.
.
–/+.)
Using Setup 3-3