Customizing Your System With The Versabay Ii - NEC VERSA 6000 Manual

Customizing Your System with the VersaBay II

It's easy to customize your NEC Versa using the VersaBay II. If you find
you require additional hard disk space or increased battery longevity, simply
remove the standard device and plug in an optional hard disk drive or bat-
tery.
NOTE
can be set to either master or slave.
However, if you use a hard disk drive from a previous NEC Versa
model, the drive is set to master. (The Master drive is the drive from
which the system boots.)
Add another hard disk drive, or second Li-Ion battery pack as follows.
1. Remove the standard diskette drive or CD-ROM reader from the Versa-
Bay II as described in the previous section, steps 1 through 6.
2. Prepare your option for installation as follows:
To install a battery pack, first connect it to the bay adapter that came
with the battery. (Follow the instructions that came with the battery
pack.)
To install a hard disk drive, first connect it to the appropriate bay
adapter. (Follow the instructions that come with the adapter.)
3. Align the option and its carrier in the VersaBay II and push it in until the
option clicks into place.
4. Turn the system over and power on. The system automatically recognizes
the newly installed option.
4-10 Using Your NEC Versa 6000
If you install a second hard disk drive in the VersaBay II, it