NEC VERSA 6000 Manual page 107

You can use either the Microsoft Sound Recorder or the Creative Labs
Wave Studio to record sound on your system. The following procedure gives
an example of recording sound from a portable tape player into a file on the
NEC Versa. To do this, you need a cable that has an audio jack on both
ends.
1. In Windows, locate and open the Audio Station program group. (To use
the Microsoft Sound Recorder, look in Accessories for the Multimedia
group. Select Sound Recorder.)
Open the WaveStudio program.
2.
3. Connect one end of a cable to the external microphone port on the NEC
Versa and the other end to your tape player. (The microphone port only
records in mono sound. To record stereo, plug the cable into the Line In
port.)
Use the VersaGlide to press the play button on the screen. (The play
4.
button has a red circle in the middle.)
On the next screen, enter a file name under the "Record to File" section.
5.
If you want to change settings, this screen offers Mixer button and a Set-
tings button. (See the online help for information about using these.)
6. Once your file name and settings are entered, press the Start button.
7. Press the play button on the tape player.
A gauge displays the recording information, including the time and file
8.
size. Be careful; audio files can become quite large.
When you finish recording, press the Stop button and turn off your tape
9.
player.
To listen to the sounds you've recorded, use the VersaGlide to press the play
button at the top of the screen.
5-2 Using Multimedia