Using Headphones; Using The Built-In Speakers; Using External Stereo Speakers - NEC VERSA 6000 Manual

Play audio from files or audio devices as follows. (This example shows how
to use the Media player option in Accessories. You can also play audio
through the Audio Station. See the Audio Station help files for details on its
use.)
1. From the Accessories group, highlight the Multimedia Media Player op-
tion.
2. Select your audio source as follows:
If playing a file, use the File menu to specify the file name.
If playing from a device, use the Device menu to select your audio
source.
Once your file is open or your source specified, press the play button.
3.
Press the square Stop button to stop playing the audio.
4.

Using Headphones

The NEC Versa 6000 headphone port delivers sound at half a watt. The ste-
reo headphones plug in through the headphone jack located on the right side
of the NEC Versa 6000. Adjust the volume with the audio software on the
NEC Versa 6000.
If the software sets the volume to medium, the knob controls volume from
low to medium. If software sets the volume to high, the knob controls vol-
ume from low to high.

Using the Built-In Speakers

The NEC Versa 6000 has built-in stereo speakers that are always available.
Adjust the volume through the software or with the volume control knob lo-
cated on the right side of the NEC Versa 6000. Use the
combination to toggle the level of the speaker volume.

Using External Stereo Speakers

For full stereo sound impact, you can plug a pair of stereo speakers into the
line-out jack located on the right side of the system. Adjust the volume through
software, with the volume control knob located on the right side of the sys-
tem, or through the controls on the speakers.
5-6 Using Multimedia
FnF6 function key