External Keyboard/Mouse - NEC VERSA 6000 Manual

5. Connect the power cable to the device and a properly grounded wall out-
let.
6. Turn on power to the system and the device.
NOTE
printer guide for instructions.

External Keyboard/Mouse

You can add a full-size PS/2-style keyboard or PS/2-style mouse to your
NEC Versa 6000. You can continue to use the system keyboard while an
external keyboard is connected.
If you want to attach both an external keyboard and a external mouse at the
same time, use the optional NEC Y-adapter. For ordering information see
the online Options Catalog.
Follow these steps to connect an external keyboard/mouse to your system.
Press the Suspend button on the NEC Versa. Check that the system is in
1.
Suspend mode.
Make sure the NEC Versa is in Suspend mode (look for the moon
icon on the Status Bar) or powered off whenever you add or remove
the keyboard. Connecting an external keyboard to the system in Ac-
tive mode can damage the keyboard controller chip.
4-36 Using Your NEC Versa 6000
Make sure your printer is online before trying to print. See the
!
CAUTION