NEC VERSA 6000 Manual page 46

In Windows for Workgroups, locate and double click the LapLink
group icon. Select LapLink for Windows.
In Windows 95, press Start, slide the cursor over to Programs, and
locate the LapLink for Windows 95 folder. In the folder, highlight the
LapLink line and press the VersaGlide selection button or tap the
VersaGlide pad once.
If you do not have a port enabled, LapLink prompts you to enable one.
Press to do so and follow the on-screen instructions to configure the
Yes
port. Otherwise, press
2. Once your ports are configured, select your communication method by
pressing the appropriate button. The buttons give you the following con-
nection options. (Balloon help displays each button's function.)
Connect over cable
Connect over wireless
Connect over modem
Connect over network
Connect over dial-up network
Once communication is established between systems, the LapLink win-
dow is displayed.
3. Select the procedure you want to use by pressing one of the last three
buttons in the LapLink toolbar at the top of the screen. (Balloon help
displays each button's function.)
Press the file transfer button to transfer files between systems.
Press the Remote Control button to exercise control over a remote
system.
Press the Chat button to converse with another user at the remote
system.
When you finish, press the disconnect button to break the link between
4.
the local and remote systems. Press
The other system is notified of the break in communications.
No .
.
OK
Introducing the Software 2-9