Printer
You can attach a printer with either a parallel or a serial connector. A paral-
lel printer connector has 25 pins; a serial connector has 9 pins. Some print-
ers come with both types of connectors.
Parallel Devices
To install a parallel device, such as a printer, you need a cable with a male
25-pin connector for the system and, for most parallel printers, a Centron-
®
ics
-compatible 36-pin connector.
NOTE
printer driver through the Windows Control Panel.
Connect a parallel device to your NEC Versa 6000 as follows.
Check that both the NEC Versa and parallel device power are off.
1.
Open the port cover on the back of the system and locate the parallel
2.
port.
Align and connect the 25-pin parallel cable connector to the parallel port
3.
on the system. Secure the cable with the screws provided.
When you connect a printer, be sure to install the appropriate
Using Your NEC Versa 6000 4-33