Selecting Files; Checking Selected Files - NEC VERSA 6000 Manual

Select files to restore — This is where you select the specific files you
want to restore.
Check list of files to be restored — This area lets you check the files
you selected for restoration.
The following sections explain how to use the Restore Individual Files
screen. Complete all sections to restore your files.

Selecting Files

Under "Select files to restore," select your files as follows:
From the left dialog box, highlight the directory that contains the files
1.
you want to restore.
From the right dialog box, highlight the files you want to use:
2.
To restore all of the files listed, click "Select all of the above." This
highlights and selects all the files listed.
To restore only some of the files listed, click the file or files you
want. This highlights the appropriate file or files.
3. Once your files are highlighted, select the appropriate button under the
list. The buttons include:
Add selected files to list — click this button to add the selected files to
the list of files to be restored.
Clear all selections — click this button to deselect the files listed.
4. Repeat steps 1 through 3 to select files from other directories. Continue
until all the files you want restored are selected.

Checking Selected Files

To continue the restoration process, check the files to be restored as follows.
1. Look at the list of files in the "Check list of files to be restored" area of
the screen.
2. If you need to add any files to the list, go back to the preceding section
and repeat those steps.
7-8 Solving Problems