Godox KNOWLED MS60R Instruction Manual page 51

USB-C Power Supply For the Light Body
Insert the attached USB-C charging cord into the USB-C port of the light body, then connect
to power source to power the light body. Please note that the USB-C port of the light body
can not charge the battery.
Note: An over 60W power supply device is needed.
Wired DMX Connection
The fixture will be equipped with DMX output and input port after connecting to the DMX
adapter cable DMX-C1 through USB-C port on the light body, then wired DMX connection
can be achieved by connecting the controller to the fixture with DMX connecting cable.
Note: The above mentioned DMX adapter cable DMX-C1, DMX controller and DMX connecting cable are all
sold separately.
50