Important Safety Instructions and Precautions First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety precautions must always be followed during use, as follows: l.
Page 26
20. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. Customers can view the latest electronic instructions on the official website of GODOX and learn about the latest product information.
Foreword Thank you for purchasing a Godox product. The Godox M600R LED video light is a powerful lighting solution with a maximum output power of 700W. It features a full-color LED light source, allowing adJustable CCT and brightness to create the desired atmosphere according to different themes. The light beads are high-brightness and high-definition, supporting thousand-bit brightness adjustments.
Name of Parts Light Body 1. Handle 2. Direction Adjustment Handle 3. Lanyard Attachment 4. Yoke 5. Mount Locking Pusher 6. Bowens Mount 7. Quick Installation Device 8. ACC (Accessory Serial Port) 9. DC Input Port 70.28mm Support Pole 4------\-...
Page 29
Controller l. Power Switch 2.Remove Controller Port 3.DC Output Port 4.Adjust Dial 5. LED Status Indicator 6.MODE Button 7.MENU Button 8.LOCK Button 9.PRESET Button 10.Display 77 .DMX OUT Port 12.DMX IN Port 13.USB-A Port 14.AC Input Port 10 9 15.DC Input Port 16.LAN Port...
What's Inside � Light Body xl Controller xl Yoke xl Reflector BR45 xl Light Protection AC Power DC Cable xl Tying Rope x7 Cover xl Cord x1 � � � Safety Wire xl Pipe Clamp xl Instruction OMX Practical xl Manual xl Note: Due to continuous updates and upgrades of the products, there may be differences...
Installation and Disassembly 1.lnstalling the Yoke 1.1 Place the light on a flat surface with the 1.2 Hold down the quick installation device heat dissipation side facing up, the four legs button on the light body and open the of the light facing downwards, and the light wrench.
Page 32
2.Removing the Yoke 2.1 Hold the yoke of the light and remove 2.2 Press the quick installation device button it from the roller stand, placing it on a flat and open the wrench to remove the yoke. surface. 3. Installing/Removing the Light Protection Cover 3.2 Press the mount locking pusher and 3.1 Align the light protection cover with the lamp head socket and rotate it clockwise to...
Page 33
4. Installing/Removing the Reflector 4.1 Align the reflector with the lamp head 4.2 Hold the mount locking pusher and rotate mount and insert it, then rotate it clockwise to it counterclockwise to remove the reflector. install it securely. Note: Please ensure proper alignment when inserting into the mount 5.
Power Switch To power on or power off the device, simply press and hold the controller's power button. • CCTMode Briefly press the MODE button to switch to CCT MODE mode. Briefly rotate the adjust dial to select CCT (':\ mode and press it to enter CCT mode interface.
Page 36
RGBWMode Press the MODE button briefly to enter the mode selection interface. Rotate the adjust dial to select RGBW, and press the adjust dial briefly to enter the RGBW Mode. Rotating the adjust dial allows you to adjust brightness/red/green/blue/white color. Press the adjust dial briefly to enter a specific setting.
Page 37
X-V Mode Press the MODE button briefly to enter the mode selection interface. Rotate the adjust dial to select the X-Y Mode, and press the adjust dial briefly to enter the X-Y Mode. Rotating the adjust dial allows you to adjust �...
Page 38
2. Lightning � This light effect simulates the lightning of thunder, often used to create a tense, terrifying, or mysterious atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0%~ 700% (in increments of 0.7%) On/Off: Turn the light on or off CCT: lBOOK-lOOOOK...
Page 39
5. TV This light effect simulates the lighting effect of a TV or screen and is often used to create a cold, mechanical, or digitized atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed.
Page 40
8. Firework • This light effect simulates the lighting effect of firework and is often used to create a colorful, romantic, and dazzling atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to enter an option and then adjust the parameter by rotating the dial as needed.
Page 41
11. Police Car This lighting effect simulates the flashing lights of a police car and is commonly used to create a tense, chasing, or suspenseful atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed.
-$:- 14.Party This lighting effect simulates the effects of colorful lights, flash lights, and lasers, and is commonly used to create a festive.joyful, high-energy atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed.
Page 43
Turn off DMX terminal Extend DMX Turn on extend DMX channels Channels Turn off extend DMX channels Note: Please refer to the 'M600R DMX Practical Table' to control the device by DMX/RDM. The electronic version can be downloaded from the official website https://www.godox.com.
Page 44
Bluetooth of the fixture. Download"GODDX Light"App Scan the OR code to download the "Godox Light" smartphone App (can be used in Android and iOS). Note: 7.The App can be used directly on the firstly installed device (smartphone or laptop).
Page 45
4. Network Settings Press the adjust dial briefly to enter network Network Settings settings interface. Press the adjust dial briefly to Network Mode select network mode, then rotate to select among Manual DHCP, Art-Net 2.x, Art-Net l O.x and manual. 192 172 6 103 Finally, press the MENU button briefly to return to the previous menu.
Page 46
5. Art-Net & sACN Press the adjust dial briefly to enter Art-Net & sACN setting interface. Rotate the adjust dial to select options among Art-Net&sACN, Art-Net Net, Art-Net Sub-Net, Art-Net Port, Art-Net Universe and sACN Universe, then press the adjust dial briefly to enter a specific setting. Once the settings are complete, press the MENU button briefly to return to the previous menu.
Page 47
7. Control Mode Press the adjust dial briefly to enter the control Control Mode mode. Press the adJust dial briefly select the Modes Normal mode, rotate the adjust dial to choose the corresponding mode. Once the settings are Frequency complete, press the MENU button briefly to return to the previous menu.
Page 48
Device. V0.21 Software Upgrade l. Download the new firmware to the U disk from official website (https://www.godox.com.cn/ firmware-continuous-light). 2. Turn off the device. Insert the U disk with new firmware into the USB Type-A port. 3. Turn on the device, and it will automatically enter the upgrading interface.
13. Factory Reset Press the adjust dial briefly to enter factory reset setting interface. Rotate and press the adjust dial briefly to select yes or no, then press the adjust dial to confirm the selection. Once the factory reset is confirmed, the light will restart, and the interface will automatically display options for Simplified Chinese and English.
Preset Setting Press the PRESET button briefly to enter preset Preset effects interface. Rotate and press the adjust dial briefly to choose and enter preset effects -$ - 4.7% Preset 1 1-20, then press briefly to choose apply/delete/ save/cancel. Once the settings are complete, 4,7% Preset 2 press the adjust dial briefly to return to the...
Maximum EIRP Power: 5dBm Declaration of Conformity GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity/...
Page 55
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you...
Page 56
Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope.
Need help?
Do you have a question about the KNOWLED M600R and is the answer not in the manual?
Questions and answers