Godox KNOWLED MS60R Instruction Manual page 39

Safety Instructions and Attentions
First of all, as the most basic principle: This product is a professional lighting set
equipment and should be used by professional lighting engineers or under the guidance
of professionals. Basic safety attentions must always be followed during use, as follows:
1. Before use, please read and understand these instructions and attentions.
2. Professional lighting is prohibited for children. When children are near, parents or
accompanying persons must supervise closely to prevent children from personal injury due
to collision with lamps or private use of lamps.
3. This lighting product is not ordinary lighting product and cannot be used for general
lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this
product.
4. When the lamp is on, it must be used with care. Do not touch high-temperature parts,
such as LED lamp beads, to avoid burns.
5. When the lamp is on, it is forbidden to look directly at the lamp beads under any
circumstances. Strong light should be used under the guidance of professional lighting
engineers. Avoid prolonged exposure to strong light under any circumstances. If eye
discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.
6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact
the manufacturer, service agent or qualified maintenance personnel to replace the lamp
bead in time to avoid accidents.
7. This product is only suitable for use in -10℃ to 40℃ operating environment and normal
humidity environment.
8. Do not use damaged equipment or accessories, and wait for professional maintenance
personnel to check and repair to confirm being normal before use.
9. During using, if the casing of this product is broken due to being dropped, squeezed or
subjected to strong impact, please do not use it, so as to avoid electric shock injury due to
contact with internal electronic components.
10. If an extension cord is required, please use an extension cord with a current rating
greater than or equal to that of the equipment. If an extension cord is rated less than the
equipment, overheating may result.
11. Some products have long power cords, please place the power cords properly and keep
them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid
improper placement that could cause pulling damage, or trip on-site personnel. Please use
the certified power cord from the original manufacturer. If the product is damaged by using
a non-certified power cord, it will not be repaired by our factory.
12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When
38