Advertisement

Quick Links

Safety Instructions and Attentions
First of all, as the most basic principle: This product is a professional lighting
set equipment and should be used by professional lighting engineers or under
the guidance of professionals. Basic safety attentions must always be followed
during use, as follows:
1.Before use, please read and understand these instructions and attentions.
2.Professional lighting is prohibited for children. When children are near, parents or
accompanying persons must supervise closely to prevent children from personal injury
due to collision with lamps or private use of lamps.
3.This lighting product is not ordinary lighting product and cannot be used for general
lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid
using this product.
4.When the lamp is on, it must be used with care. Do not touch high-temperature parts,
such as LED lamp beads, to avoid burns.
5.When the lamp is on, it is forbidden to look directly at the lamp beads under any
circumstances. Strong light should be used under the guidance of professional lighting
engineers. Avoid prolonged exposure to strong light under any circumstances. If eye
discomfort, please turn off the lamp in time, suspend use, and see a doctor immediate-
ly.
6.If the lamp bead is damaged or deformed by heat, stop using this equipment, and
contact the manufacturer, service agent or qualified maintenance personnel to replace
the lamp bead in time to avoid accidents.
7.This product is only suitable for use in -10℃ to 40℃ operating environment and
normal humidity environment.
8.Do not use damaged equipment or accessories, and wait for professional maintenance
personnel to check and repair to confirm being normal before use.
9.During using, if the casing of this product is broken due to being dropped, squeezed or
subjected to strong impact, please do not use it, so as to avoid electric shock injury due
to contact with internal electronic components.
10.If an extension cord is required, please use an extension cord with a current rating
greater than or equal to that of the equipment. If an extension cord is rated less than
the equipment, overheating may result.
11.Some products have long power cords, please place the power cords properly and
keep them in a safe place. Avoid contacting the power cord with overheating surfaces,
avoid improper placement that could cause pulling damage, or trip on-site personnel.
Please use the certified power cord from the original manufacturer. If the product is
damaged by using a non-certified power cord, it will not be repaired by our factory.
12.Be sure to unplug equipment from the power outlet before cleaning and repairing.
When not in use, do not pull the power cord to unplug the equipment. For normal
power-off, please hold both ends of the plug of the equipment with your hands and
pull the plug out of power outlet. This equipment needs to be connected to a ground-
ed outlet.
23
13.This equipment is not waterproof, please keep it dry and do not immerse it in water or
other liquids. The equipment should be installed in a dry and ventilated place, and
avoid using it in rainy, humid, dusty or overheated environments. Do not place any
objects on the lamp or let liquid flow into the lamp to avoid accidents.
14.Do not disassemble the product without permission. If the product fails, it must be
checked and repaired by authorized maintenance personnel.
15.Before storing, make sure that the equipment has cooled down completely. For
storage, unplug the power cord from the equipment. The equipment should be placed
in the carrying case or in a ventilated dry place.
16.Do not place equipment near flammable and volatile solvents such as alcohol and
gasoline.
17.Do not use accessories that are not recommended by our factory to avoid fire, electric
shock or personal injury.
18.When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth
to wipe the dirt of the equipment.
19.Please take off the protective cover before using.
20.This product complies with ROHS,CE,KC,PSE and FCC certification, please refer to
the relevant national standards for use and operation.
21.The safety instructions are formulated according to the strict testing of the factory,
and the design and specifications of the equipment are subject to change without
prior notice. For latest product information, please check the GODOX website and
view latest electronic instruction.
22.Some products have built-in lithium batteries. Please use specified chargers, and use
them within a proper range of the specified voltage and temperature according to the
correct operating instructions.
23.Some products are battery powered. Do not use any batteries, power sources or
accessories not specified in the instructions for such products. Keep batteries and
other accessories out of the reach of children and infants. In the instance that a child
or infant swallows a battery or accessory, immediate emergency medical attention is
required. If the battery leaks, becomes discolored, deformed, emits smoke, or emits
an abnormal odor, remove it immediately. Be careful during removal to avoid burns.
Continued use could result in fire, electric shock, or burns. Do not use any deformed
or modified batteries. Do not disassemble or modify this product or battery. Do not
heat or solder the battery. Keep the battery away from fire or water. Do not incorrectly
insert the positive and negative ends of batteries, or mix old and new batteries or
batteries of different types together.
24.One-year warranty period, accessories such as consumable batteries, adapters,
power cords, etc. are not covered by this warranty.
25.If it is found that the equipment is repaired without authorization, the one-year
warranty period will be cancelled and relevant fees will be charged for maintenance.
26.Machine failures caused by non-standard operation are not covered by the warranty.
keep these instructions!
24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Knowled M300Bi and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Godox Knowled M300Bi

  • Page 1 6.If the lamp bead is damaged or deformed by heat, stop using this equipment, and prior notice. For latest product information, please check the GODOX website and contact the manufacturer, service agent or qualified maintenance personnel to replace view latest electronic instruction.
  • Page 2 Foreword Thank you for purchasing! Godox M200Bi/M300Bi is a LED Light product with superior performance. It has a separation design of light body and controller, wide color temperature range, high brightness, low consumption, high power, ultra-high CRI and various dimming curves functions, quite suitable for large photo studios, broadcast studios, outdoor or large-scale field scenes.
  • Page 3 Name of Body ⑨ ⑩ Light Body ⑧ ⑤ ① ⑪ ⑦ ② ⑥ ③ ⑦ 1.Black Battery Removal Button /FX Button ⑥ 8.Menu Button 2.V-mount Battery Box ⑧ 3.AC INPUT Port 9.Power Switch Button 10.SET Adjustment Knob 4.48V DC Port ④...
  • Page 4: Separately Sold Accessories

    What’s in the Box(M200Bi/M300Bi) Installation and Disassembly Guide 1. Connect the Controller and Light Body Press and hold the spring latch button of the connecting cord, insert the connecting cord into the DC INTPUT Port of the light body, insert the other end of the connecting cord into the DC OUTPUT Port of the controller to complete the connection.
  • Page 5: Power Supply

    Power Supply 3. Mount on the light stand Loosen the handle of the controller 1. AC Power Supply clamp, then insert the light stand and rotate the handle to tighten.Finally, insert the V port of the controller into the clamp slot. Tip: Press and hold the mount fixing AC100V-240V pusher can easily remove the controller.
  • Page 6: Display Screen

    Display Screen 3. CCT Adjustment Short press the SET adjustment knob on the main interface to make the arrow aimed 2.4G Wireless Channel Group Bluetooth DMX at CCT value, then turn it to adjust CCT from 2800K to 6500K, with the increase or decrease of 100K in normal speed and 500K in fast speed.
  • Page 7 4.4 Fan Turn the SET adjustment knob on the For more smartphone APP operations, Fan interface to choose from AUTO, please open the "help" in “GodoxLight”APP OFF, LOW, HIGH modes. to gain detailed guidance. Note: Enter mute mode when turning off the fan.Short press the fan switch button to turn on Note: the APP can be used directly on the firstly installed device (smartphone or tablet).
  • Page 8 4.8 Reset Turn the SET adjustment knob on the Reset interface to choose “Yes” or “No” and shor t press to confirm. If you choose “Yes” , the system will initiate r e s e t t i n g p r o g r a m a n d r e s e t t i n g progress bar is displayed on the screen, after which it will return to the main interface.
  • Page 9 Maximum Brightness of M200Bi in Different States CCT mode: Maximum Brightness (%) in Auto Cooling Mode or High-Speed Cooling Mode when supplied by V-mount battery V-mount battery linear S-curve exponential logarithmic 14.8V(single) 14.8V(double) 26V(single) Switch from AC Power Supply to V-Mount Battery Power 14.8V+26V 100% 100%...
  • Page 10 Maximum Brightness of M300Bi in Different States CCT mode: Maximum Brightness (%) in different Fan Mode when supplied by AC power CCT mode: Maximum Brightness (%) in Auto Cooling Mode or High-Speed Cooling Mode when supplied by V-mount battery Fan Mode linear S-curve exponential...
  • Page 11: Software Upgrade

    Software Upgrade CCT mode: Maximum Brightness (%) in different Fan Mode when supplied by AC power 1.Download the new firmware to the U disk from the official website (http://www.godox.com.cn/Downloads.html). Fan Mode linear S-curve exponential logarithmic 2. Turn off the LED light. Insert the U disk with new firmware into the USB upgrade...
  • Page 12: Maintenance

    M300Bi Maintenance • This product, except consumables e.g. adapter and power cable, is supported with a Testing Conditions Illuminance Unit one-year warranty. 4000 1000 • bare lamp Maintenance of the light must be performed by our authorized maintenance 97.9 49.6 2800K department which can provide original accessories.
  • Page 13: Technical Data

    Controller Dimension 270.4*123.6*132mm Declaration of Conformity: Light Body net ≈3.2kg ≈3.5kg GODOX Photo Equipment Co,Ltd. hereby declares that the This equipment are in Controller net ≈2.7kg ≈2.7kg compliance with the essential requirements and other relevant provisions of EU Direc- 2402.00-2480.00MHz Bluetooth Transmission Frequency tive 2014/53/EU.
  • Page 14 产品保修 如何获得保修服务 尊敬的用户, 本保修卡是申请保修服务的重要凭证, 请您配合销售商填写并妥善保管, 谢 您可直接与产品销售商或授权服务机构联系, 也可拨打神牛产品售后服务电话, 与我们 谢! 联系, 由我们的服务人员为您安排服务。 申请保修时, 您应提供有效的保修卡作为保修凭 证, 方可获得保修。 如您不能提供有效的保修卡, 则在我们确认产品或部件属于保修范围 的情况下, 也可以为您提供保修, 但这不作为我们的义务。 产品信息 型号 产品条码 用户信息 姓名 联系电话 不适用保修的情况 如产品存在下列情况, 本文件项下的保证和服务将不适用 ①产品或部件超过相应保修期 通信地址 ; ②错误或不适当使用、 维护或 保管导致的故障或损坏, 如: 不当搬运; 非按产品合理预期 用途使用; 不当插拨外接设备; 跌落或外力挤压; 接触或暴露于不适当温度、 溶剂、 酸碱、 名称...
  • Page 15: Warranty

    Dear customers, as this warranty card is an important certificate to apply for our authorized service institutions. You can also contact the Godox after-sale service call maintenance service, please fill in the following form in coordination with the seller and and we will offer you service.

This manual is also suitable for:

Knowled m200bi

Table of Contents