Side Panel Removal; Removing Side Panel Screws - NEC PowerMate P2166 Series Service Manual

Side Panel Removal

Remove the system unit side panel as follows.
1. Remove the system unit cover as previously described (see "System Unit Cover
Removal").
2. Remove the two screws from the top of the panel (see Figure 5-20).
3. Lift the side panel away from the system unit.
WARNING: Before removing the system unit
side panel, turn off the power and unplug the
system power cable. Power is removed only
when the power cable is unplugged.
Figure 5-20 Removing Side Panel Screws
Repair 5-19