Minitower Setup; Desktop Power Button, Lamps, And System Controls - NEC PowerMate P2166 Series Service Manual

2-4 Setup and Operation
Figure 2-4 Desktop Power Button, Lamps, and System Controls
To operate your speakers, turn on your system.
Push the power button on the front of the right speaker.
1.
2. Turn on your audio source.
3. Adjust the volume by turning the volume control on the front of the right speaker.
4. Adjust the bass and treble controls on the front of the right speaker to the desired
levels.

Minitower Setup

Set up the minitower systems by making the following connections.
Set the voltage selector switch to 115V (U.S. and Canada) or 230V and plug the
1.
power cord into the power socket (see Figure 2-5).
NOTE: The correct AC input voltage must be
properly set. Select the appropriate voltage with
the voltage selector switch located at the rear of
the system.