7.
Replace any cables or boards that may have been removed.
8.
Replace the system unit cover.
Video Upgrade
Upgrade the video memory by adding a 3-MB upgrade SGRAM module as follows.
Remove the system unit cover as previously described.
1.
2.
Locate the video SGRAM sockets (see "System Board Options" earlier in this
section).
If any expansion boards are obstructing your view of the sockets, remove the
boards (see "Removing an Expansion Board" earlier in this section).
Align the module over the sockets on the system board (see the following figure).
3.
Using equal pressure, gently press the module into the sockets.
Figure 3-18 Inserting the SIMM
CAUTION: Reduce static discharge by touching
the system's metal chassis.
NOTE: The module is keyed to only fit in the
correct position.
Option Installation
3-19