NEC PowerMate P2166 Series Service Manual page 76

2-32 Setup and Operation
Log onto the BBS as follows.
From the Windows 95 desktop, click the Start button.
1.
Point to Programs. Point to Accessories and then click HyperTerminal.
2.
Double click the Hypertrm.exe icon. The HyperTerminal program appears.
3.
4. Follow the instructions on the screen to set up your modem. Click the
HyperTerminal Help button for information about dialing the phone number.
If you need to check communications settings, check that the settings match the
following BBS parameters.
T
Baud rate: select any baud rate that matches your modem
T
Parity: none
T
Data bits: 8
T
Stop bits: 1
T
Flow control: Xon/Xoff (select Hardware if using 14.4 bps or higher)
Following the HyperTerminal instructions, enter the BBS phone number (508-
5.
635-4706). Your business phone system and/or location might require a 9 1 or 1
prefix.
Press
6.
Enter
Enter your first name, last name, and password. Press
7.
8. Follow the screen prompts until the Main Menu is displayed.
9. At the Main Menu, select
desktop conference.
10. From the Main Menu, press
At the File menu, select
11.
select a file for downloading.
NOTE: The first time that you use the BBS,
you will be requested to provide information for
a new user questionnaire.
twice
to join a conference. Select
J
and
F
for a list of downloadable files. Follow the prompts to
F
Enter
Conference 1
for the File menu.
Enter
after each.
for the