Connecting An Rs-232C Device; Connecting A Printer Cable To The Minitower; Connecting An Rs-232C Cable To The Desktop - NEC PowerMate P2166 Series Service Manual

Figure 3-47 Connecting a Printer Cable to the Minitower
3. Secure the cable with the screws provided.
Connect the other end to the printer.
4.

Connecting an RS-232C Device

Turn off power to the system and to the serial device.
1.
2. Connect one end of the serial cable to one of the two serial ports on the rear of
the computer.
Figure 3-48 Connecting an RS-232C Cable to the Desktop
NOTE: Before connecting a serial device to the
system, be sure the serial device is set up
correctly. Follow the setup instructions that
come with the option.
Option Installation 3-43