T
PCI/ISA backboard
T
3 1/2-inch drive bracket
T
SIMMs installed on the system board
NOTE: Remove the optional video DRAM
chips if installed (see Section 3, Options).
Remove and label all cables connected to the system board Appendix A provides
2.
the general locations of the connectors for the system board.
Remove the seven screws that hold the system board to the system unit chassis
3.
(see Figure 5-17). Remove the system board out the side of the system unit.
Figure 5-17 System Board Connectors and Screws
NOTE: When replacing a defective system
board, remove the I/O spring from the defective
board and attach it to the new board.
Desktop Repair
5-15