Installing The Overdrive Processor; Releasing The Processor - NEC PowerMate P2166 Series Service Manual

2. Locate the processor socket (see "System Board Options" earlier in this section).
If any expansion boards are obstructing the socket, remove the boards.
Release the heatsink clip from the tabs on the socket.
2.
Release the processor by pulling the lever on the socket away from the socket and
3.
as far back as it goes without forcing.
Lift the processor out of the socket.
4.
Continue with the following procedure to install the new OverDrive processor.
5.

Installing the OverDrive Processor

1. Remove the processor currently in the system (see previous procedure).
2. Align the notched corner of the OverDrive processor with the alignment corner in
the socket and insert the processor.
Figure 3-20 Releasing the Processor
CAUTION: Before picking up the processor,
reduce static discharge by touching the metal
frame of the system unit.
CAUTION: Before picking up the OverDrive
processor, reduce static discharge by touching
the metal frame of the system unit.
Option Installation 3-21