LDCM Admin Function
The following information is for System Administrator use in
administrating local area networks. This information applies
to systems that are configured for Windows 95 or Windows
98 or Windows NT.
The LANDesk Client Manager (LDCM) Admin function is
installed on the C drive of your computer when LANDesk
Client Manager is installed from the NEC Application and
Driver CD. For information on installing LANDesk Client
Manager, see "Launching the Application and Driver CD" in
Chapter 3.
Once LANDesk Client Manager is installed, start LDCM
Admin as follows.
1. Power up the system.
2. Click
Start
3. In Explorer, double click
4. Double click
5. Double click
Cheyenne Backup
Cheyenne Backup is a data management and backup
program, available on systems running the Windows 95 or
Windows 98 operating system. This program is separate from
but integrates into the Intel LANDesk Client Manager's
Smart Hard Drive Auto-Backup Utility and the NEC Backup
Utility.
, point to
Programs
, and click
(C:) Landesk
Admin
.
and follow the prompts.
Setup.exe
Managing System Resources 4-11
Explorer
.
.