Processor Subsystem - NEC Image P100E Series Manual

EZ-SCSI Setup utility for setting SCSI parameters
System input/output (I/O) controller integrating serial
ports, parallel port, SCSI-2 port, enhanced IDE hard
disk controller, SCSI-2 controller, and diskette drive
controller
Extended super video graphics accelerator (VGA) con-
troller with 2-MB interleaved video dynamic random
access memory (DRAM) standard
Flash ROM for fast economical BIOS upgrades
Quad-speed IDE CD-ROM reader (hard disk configura-
tions only)
Plug and Play operating system (O/S) support for Plug
and Play ISA expansion boards
Display Data Channel (DDC) support for automatic
configuration of resolutions and refresh rates for DDC-
compliant monitors
System security for ensuring system use by authorized
users only.
See the following sections for descriptions of the key
features of the Image P90E and Image P100E systems.
(Refer to Appendix B for system specifications.)

Processor Subsystem

The Image P90E system uses a 64-bit, 90 MHz Pentium
microprocessor. The P100E system uses a 64-bit, 100 MHz
Pentium microprocessor.
The 90-MHz and 100-MHz processors each have 16 KB of
primary write-back internal cache, 8 KB for instructions
and 8 KB for data. Integrated into the processor is a math
coprocessor.
1-4 Features of Your System