Changing Mouse Parameters; Command Line Options - NEC Image P100E Series Manual

NOTE: You can include the LMOUSE command in
an AUTOEXEC.BAT file.

Changing Mouse Parameters

Use the mouse parameters to change the function of the
mouse and the way that your screen cursor responds to
mouse movement. You can combine any number of parame-
ters when loading the mouse drivers.
The parameters described in the following section are com-
mon to all types of Logitech mice. If you have another type
of mouse, parameters may vary.

Command Line Options

The syntax for setting mouse parameters using a DOS
command line is as follows:
The following list describes the parameters that you
can use.
Ballistic Effect (BHIGH, BLOW, BON, BOFF) — The
ballistic effect gives you speed and precision as you
require them. Moving your mouse quickly lets you
sweep the cursor across your screen quickly. Moving it
slowly lets you zero in on an exact position.
The ballistic effect lets you select a single pixel easily at
any sensitivity level. This feature is ideal for graphics
programs. When you use a paint or draw program, the
ballistic effect slows your mouse cursor when you
create fine details in your drawing and then speeds up
when you need to go between your drawing and the tool-
box or a menu.
5-2 Using NEC Utilities and Drivers
LMOUSE parameter parameter...