Table of Contents
Advertisement
Configure/View Host Adapter Settings
The Configure/View Host Adapter option allows you to
review the settings of your installed SCSI devices and to
reconfigure the settings if you install optional SCSI devices.
At the SCSI Select utility menu, position the cursor to
Configure/View Host Adapter Settings and press Enter to
display the Configure/View Host Adapter menu. A screen
similar to the following displays.
NOTE: The screen shown is typical of your system.
The actual items on the menu depend upon the
hardware installed in your system.
SCSI Bus Interface Definitions
Additional Options
Arrow Keys to Move Cursor, <Enter> to Select Option, <ESC> to Exit (*=default)
For the SCSI Bus Interface Definitions settings, use the
arrow keys to move the cursor to the parameter, press
to change the setting, and press
Enter
to reset to the Host Adapter defaults.
4-32 Using the ECU and SCSI Utilities
AIC-7850 at Bus Device 00:03h
Configure/View Host Adapter Settings
Host Adapter SCSI ID ......................... 7
SCSI Parity Checking .......................... Enabled
Host Adapter SCSI Termination .......... Enabled
SCSI Device Configuration .................. Press <Enter>
Advanced Configuration Options ......... Press <Enter>
<F6> - Reset to Host Adapter Defaults
to exit. Press
Esc
F6
Advertisement
Table of Contents
