Scsi Disk Utilities; Advanced Configuration Options - NEC Image P100E Series Manual

Advanced Configuration Options

PARAMETERS OPTIONS
Reset SCSI Bus Enabled (default)
at IC Initialization Disabled
Note: The following options have no effect if the BIOS is disabled.
Host Adapter Enabled (default)
BIOS Disabled
Support Boot Only (default)
Removable All Disks Disabled
Disks under
BIOS as Fixed
Disks
Extended BIOS Enabled (default)
Translations for Disabled
Drives Greater
than 1 GByte
BIOS Support For Enabled
More Than 2 Disabled
Drives (MS-DOS
5.0 and above)

SCSI Disk Utilities

Use the SCSI Disk Utilities option to check what SCSI
devices are currently installed in your system and to set the
SCSI ID number on any optional SCSI devices that you
may install.
At the SCSI Select utility opening screen, position the
cursor to SCSI Disk Utilities and press Enter to display the
SCSI Disk Utilities menu.
4-34 Using the ECU and SCSI Utilities
DESCRIPTION
Enables or disables the Reset SCSI
Bus at Initialization.
Enables or disables the host
adapter BIOS
Allows use of removable hard disks
as fixed hard disks under BIOS
control
Enables or disables extended BIOS
for 1 GByte or larger drives.
Enables or disables BIOS support
for more than two drives.