If you select"Tone" for the Audio prompts setting, then you will only get a tone for each of the prompts (Please say a command, Please say a phone number, Dial

<phone number digits>?, and Calling <phone number digits>) instead of the audio prompts.

In all cases (tone or "voice and tone"), the display will show the prompt that to which the phone is requesting a response.

Correcting Mistakes

(Right) navigation key to scroll through the number and place the cursor to the right of the incorrect number. Press CLR (Clear/Back) key to

Press

(Left) or

clear in di vid ual dig its to the left of the cursor or hold the CLR (Clear/Back) key at least 2 seconds to delete the entire phone num ber. Press a number key and it is in serted

at the cur sor position.

Ending Calls

There are 3 ways to end a call:

(End/On-Off), (2) Press MENU (Options Menu) and 9 to disconnect a call, or (3) Close your phone. (See Flag.) The phone returns to Idle screen.

(1) Press

Receiving Calls

When someone calls your number (phone is powered On),

The phone ringer sounds.

The second LCD backlight (located at the back of the flip cover) flashes.

The phone number of the person calling may display on the bottom, left of the screen if the caller ID feature is available and the caller has activated the feature.

The calling person's number with a name and a picture (see page 98) may display if you have the caller has a phone number, name, and a picture stored in the

phonebook.

If the caller has withheld their caller ID, the screen provides a message that the number is being withheld.

If you are dialing a call, the phone gives

priority to receiving a call unless you have

already pressed

(Send).

The digital technology of your NEC a232

wireless phone helps to ensure that your

conversations are kept secure.

Always press

(End/On-Off) or close your

phone even if the other person has ended the