Email Settings; Account - NEC A232 Manual

Email Settings

Account

The Email Account settings have been pre-configured by your network service provider.
To edit or change account settings, from within the Advanced menu screen,
*
Press 3 and 1.
Press MENU (Options menu) to display the Options menu.
The following lists selections from the Email account options menu
(1) Email account Enter the email account Name, Email address, Your name, and the Reply to email address. Press MENU (Options Menu) to use the
Clipboard feature or cancel the process. Press Softkey1 (Save) again to save your changes.
(2) SMTP settings Select from the following:
Input the Outgoing SMTP server address. Press MENU (Options Menu) to use the
SMTP server
Clipboard feature or cancel the process. Press Softkey1 (OK). Press CLR to return to the SMTP
settings menu. Press Softkey1 (Save) again to save your changes.
Account Input your SMTP username and Password. Press MENU (Options Menu) to use the Clipboard
feature or cancel the process. Press Softkey1 (OK). Press CLR to return to the SMTP settings
menu. Press Softkey1 (Save) again to save your changes.
SMTP auth Select Yes if the outgoing SMTP server requires a username and password to send email, or No if it
does not. Press CLR to return to the SMTP settings menu. Press Softkey1 (Save) again to save
your changes.
(3) POP3 settings Select from the following:
POP3 server
Account
Leave messages on server
Press CLR until you return to the Msg settings menu.
64
Input the Incoming POP3 server address. Press MENU (Options Menu) to use the
Clipboard feature or cancel the process. Press Softkey1 (OK). Press CLR to return to the POP3
settings menu. Press Softkey1 (Save) again to save your changes.
Input your SMTP username and Password. Press MENU (Options Menu) to use the
Clipboard feature or cancel the process. Press Softkey1 (OK). Press CLR to return to the POP3
settings menu. Press Softkey1 (Save) again to save your changes.
Select Yes to leave messages on the server after they are downloaded, or No if you do not want them
to remain on the server. Press CLR to return to the POP3 settings menu. Press Softkey1 (Save)
again to save your changes.