Call Timer; Using Call Features During A Call; Placing A Call On Hold; Call Waiting - NEC A232 Manual

Call Timer

During calls, the call timer displays the call duration on screen, incrementing the time in minutes and seconds until the call is ended. The call timer display must be set to
On (see page 42).

Using Call Features During a Call

The Call in progress screen displays during a call. The instructions for the following call features begin at the Call In Progress screen.

Placing a Call On Hold

To place a received or dialed call on hold from the Call in progress screen:
*
Press Softkey 2 (Hold) or press MENU (Options Menu) and 1 to place a call on hold from the Phone function Options menu.
Press Softkey 2 to retrieve the call.

Call Waiting

During a call, another received call is announced by a beep tone in the earpiece and an incoming message on the screen. To use call waiting from the Call in progress screen
when you hear the beep tone:
*
Press (Send) to answer the new call and automatically place the current call on hold.
Finish the conversation and press
Press Softkey 2 to take the first call off of hold.
You may switch between the calls:
*
Press (Send) to answer the new call and automatically place the current call on hold.
Press Softkey 2 (Hold) to place the new call on hold and go back to the original call, finish the conversation, and press
Press Softkey 2 to take the new call off of hold.

Mute A Call

To mute a call using the Phone function Options menu from the Call in progress screen:
*
Press MENU (Options Menu) and 2 to mute the call.
Press MENU (Options Menu) and 2 to un-mute a muted call.
When a call is muted and you accept a received call, mute is automatically turned Off.
28
(End) to terminate the new call.
(End) to terminate the call.