Table of Contents
Advertisement
Battery
Refer to General Care and General Safety (see page 11), Battery Care and Disposal (see page 14), and Preparing the Battery (see
page 19) of the a232 User Guide for information regarding the proper care, disposal, and charging of the battery.
AC Adapter and Charger Unit
CAUTION: POSSIBLE SHOCK HAZARD!
Do not touch the AC adapter main unit, the AC cord, or electrical outlet with wet hands.
Do not connect a charger or any other eternal DC source if the phone's battery is not inserted.
Do not pull the AC cord when removing it from the electrical outlet.
Use the correct voltage range. The AC adapter is 100V-240V.
Do not leave the AC adapter plugged in when not in use.
The NEC a232 plug end has release clips (see picture to right). Squeeze the release clips and insert into the NEC a232 USB/charger
connector port. When inserting the NEC a232 plug, be sure that the rectangular opening on the connector is lined up with the
rectangular opening in the phone. The plug will slide easily into the phone. DO NOT FORCE THE PLUG! When removing the plug
from the phone, squeeze both release clips and gently pull straight out.
Hands-free Headset
Insert the NEC a232 plug into the headset connector.
Only the foam covered ear piece is placed within your ear. Do not put any other part of the headset in your ear.
Attach the clip near the neckline of your clothing so that the microphone is near your mouth. Do not attach the clip to any part
of your body.
The hands free microphone is on one side with On/Off switch on the opposite side as shown in the picture. Press the round button
to answer/connect a call. When the conversation is over, press the round button to disconnect the call.
154
Advertisement
Table of Contents
