Table of Contents
Advertisement
Field
Skip MReboot
Delay
Auto-Execution
Ceretificate Management
CPE Certificate Password
CPE Certificate
CA Certificate
3.8.10
ACL
Choose Admin > ACL, and the page as shown in the following figure appears. In this page, you can configure the
IP address in the access control list. If access control list (ACL) is enabled, only the effective IP adresses in ACL
can access the ADSL router.
The procedure for configure ACL is as follows:
Step 1 Select Enable and click take effect.
Step 2 Select the interface from the drop-down list and enter the IP address in the LAN.
Step 3 Click Add to add the interface and IP address into the ACL List.
Step 4 Click take effect to take the settings into effect.
I
Note:
If you select Enable in ACL Capability, ensure that your host IP address is in ACL list before it takes effect.
3.9 Diagnostic
updates.
Specify whether to send an MReboot event code in the inform
message.
Specify whether to start the TR-069 program after a short delay.
Specify whether to automatically start the TR-069 after the router is
powered on.
The certificate password of the router.
Click Browse to browse and upload the certificate for the router.
Click Browse to browse and upload the CA certificate for the
router.
56
Description
Advertisement
Table of Contents
