Snmp - SMC Networks 7904WBRB4 User Manual

3.8.8

SNMP

Choose Admin > SNMP, and the page as shown in the following figure appears. In this page, you can configure
the parameters of Simple Network Management Protocol (SNMP).
The following table describes the parameters and buttons in this page:
Field
Trap IP Address
Community name (read-only)
Community name (write-only)
Enter the IP address of trap host. The trap information is sent to the host.
The network administrators must use this password to read the information of
this router.
The network administrators must use this password to configure the
information of the router.
54
Description