In the navigation bar, click Diagnostic. The Diagnostic page that is displayed contains Ping, ATM Loopback,
ADSL, and Diagnostic.
3.9.1
Ping
Choose Diagnostic > Ping, and the page as shown in the following figure appears.
The following table describes the parameters and buttons in this page.
Field
Host Address
Send
3.9.2
ATM Loopback
Choose Diagnostic > ATM Loopback, and the page as shown in the following figure appears. In this page, you can
use VCC loopback to check the connectivity of the VCC. The ATM loopback test is useful for troubleshooting
problems with the DSLAM and ATM network.
Enter the IP address.
Click it to start to ping the host address.
57
Description