Table of Contents
Advertisement
The following table describes the parameters in this page:
Field
DHCP Server
IP Pool Range
Show Client
Max Lease Time
Domain Name
Gateway Address
MAC-based Assignment
Click Show Client in the DHCP Server Setup page, and the page as shown in the following figure appears. In this
page, you can view the IP address assigned to each DHCP client.
If set to DHCP Server, the router can assign IP addresses, IP default gateway and
DNS servers to the hosts that are in Windows95, Windows NT and other systems that
support the DHCP client.
It specifies the first and the last of contiguous IP address of the IP address pool.
Click it, the Active DHCP Client Table page appears. It shows the assigned IP
address of the clients.
The lease time determines the period that the PC retains the assigned IP addresses
before the IP addresses change.
Enter the domain name if you know. If you leave it blank, the domain name obtained
by DHCP from the ISP is used. You must enter host name (system name) on each
individual PC. The domain name can be assigned from the router through the DHCP
server.
Enter the IP default gateway of the IP address pool.
Click it, the Static IP Assignment Table page appears. You can assign the IP
addresses in the LAN to specific PCs based on their MAC address.
Description
22
Advertisement
Table of Contents
