Table of Contents
Advertisement
3.8.9
TR069
Choose Admin > TR069, and the page as shown in the following page appears. This page is used to configure
TR-069 customer premises equipment (CPE). In this page, you can configure the parameters of auto-configuration
server (ACS).
The following table describes the parameters and buttons in this page:
Field
ACS
URL
User Name
Password
Periodic Inform Enable
Periodic Inform Interval (s)
Connection Request
User Name
Password
Debug
ACS Certificates CPE
Show Message
CPE Sends GetRPC
The URL of the ACS to connect to.
The user name for logging in to the ACS.
The password for logging in to the ACS.
Select Enabled to periodically connect to the ACS to check for
configuration updates.
Specify the amount of time between connections to ACS.
The username to connect the router from the ACS.
The password to connect the router from the ACS.
Specify whether to check the ACS certification of the router.
Select Enabled to display ACS SOAP messages on the serial
console.
Select Enabled, the CPE contact the ACS to obtain configuration
55
Description
Advertisement
Table of Contents
