Table of Contents
Advertisement
The following table describes the parameters and buttons in this page:
Field
Select
Access
Control
Mode
Apply Changes
MAC Addr
Apply Changes
Reset
Current Access Control
List
Delete
Delete All
Reset
3.5.5
WDS Settings
Choose WLAN > WDS Settings, and the page as shown in the following figure appears.
You can select Disable, Allow Listed, or Deny Listed from the drop-down list.
Select Allow Listed to enable the white list function. Only the clients whose
MAC address is listed in the Current Access Control List can access the router.
Select Deny Listed to enable the black list function. The clients whose MAC
address is listed in the Current Access Control List are blocked to access the
router.
Click it to save the settings of selecting the access control mode.
Enter the MAC address of the wireless station that are allowed or denied access to
your router in this address field.
Click it to save the settings of MAC address.
Click it to refresh the MAC address.
The MAC addresses in this table are allowed or denied to access to the router.
Click it to delete the row you select in the Current Access Control List.
Click it to delete all rows in the Current Access Control List.
Click it to refresh the Current Access Control List.
Description
29
Advertisement
Table of Contents
