System Log; Snmp - SMC Networks 7901BRA4 - annexe 1 Manual

Refresh
Time Mode
Enable SNTP Client Update
SNTP Server
Time Zone

3.7.7 System Log

Choose Admin > System Log. The page shown in the following figure appears. In this page, you can enable or
disable the system log function. You can also view the system log.
The following table describes the parameters and buttons of this page.
Field
System Log
Apply Changes
Refresh

3.7.8 SNMP

Choose Admin > SNMP. The page shown in the following figure appears. In this page, you can set the SNMP
parameters.
SMC7901BRA4 User Manual
Refresh the system shown in the page.
Select Time Server, the router gets the system time from the time server.
Select Manual, you should configure the system time manually.
Select it, you can choose the correct SNTP server which you want.
Choose the SNTP server from the drop-down list box.
Select the time zone in which area you are.
You can enable or disable the system log function.
Save the settings of this page.
Refresh the system log shown in the textfield.
39
Description