Dhcp Server - SMC Networks 7904WBRB4 User Manual

DHCP server (DHCP proxy) where it relays IP address assignment from an actual real DHCP server to clients. You
can enable or disable DHCP server or DHCP proxy.
Chooose LAN > DHCP Settings, and the page as shown in the following figure appears. There are three DHCP
modes available: Disable, DHCP Proxy, and DHCP Server. The following describes them respectively.
Disable
Select Disable in the DHCP Server Setup page, and the page as shown in the following figure appears.
DHCP Proxy
Select DHCP Proxy in the DHCP Server Setup page, and the page as shown in the following figure appears.
The following table describes the parameters in this page:
Field
DHCP Proxy
DHCP Server Address

DHCP Server

Select DHCP Server in the DHCP Server Setup page, and the page as shown in the following figure appears.
If set to DHCP Proxy, the router acts a surrogate DHCP server and relays the DHCP
requests and reponses between the remote server and the client.
Enter the DHCP server address provided by your ISP.
Description
21