Isp Settings; Connect The System; Connect The Adsl Line - SMC Networks SMC7904WBRA-N User Manual
Adsl2 barricade n draft 11n wireless 4-port annex a adsl2/2+ modem router
Hide thumbs
Also See for SMC7904WBRA-N:
- User manual (129 pages) ,
- Specification sheet (2 pages) ,
- Overview (2 pages)
Table of Contents
Advertisement
ISP Settings
Please collect the following information from your ISP before setting up
the Barricade:
•
ISP account user name and password
•
Protocol, encapsulation and VPI/VCI circuit numbers
•
DNS server address
•
IP address, subnet mask and default gateway (for fixed IP users only)
Connect the System
The Barricade can be positioned at any convenient location in your office
or home. No special wiring or cooling requirements are needed. You
should, however, comply with the following guidelines:
•
Keep the Barricade away from any heating devices.
•
Do not place the Barricade in a dusty or wet environment.
You should also remember to turn off the power, remove the power cord
from the outlet, and keep your hands dry when you install the Barricade.
Connect the ADSL Line
Connect the supplied ADSL cable from the port labelled ADSL on the
Splitter/Microfilter to the ADSL port on your Barricade. When inserting
the plug, be sure the tab on the plug clicks into position to ensure that it is
properly seated.
Note: The ADSL port of SMC7904WBRA-N is RJ-11.
2-6
I
NSTALLATION
Advertisement
Table of Contents
