Appendix B: Remotely Managing The Interactive Flat Panel; Connecting A Computer To The Interactive Flat Panel - Smarttech SMART Board 6000 Series Administrator's Manual

Appendix B
Remotely managing the
interactive flat panel
Connecting a computer to the interactive flat panel
Configuring the computer's serial interface settings
Power modes
Commands and responses
SMART Board 6055 and 6065 command inventory
Power state
Source
Video
Audio
System information
SMART Board 6065-V2 and 6075 command inventory
Power state
Source
Video
Audio
Multi-Window
System information
You can connect a computer to the room control input on the SMART Board 6000 series
interactive flat panel to remotely select video inputs, turn the interactive flat panel on or off and get
information about the interactive flat panel's current settings, such as contrast and power state.
Connecting a computer to the
interactive flat panel
To connect a computer to the interactive flat panel
Connect an RS-232 cable from the computer's serial output to the room control input on the
connector panel.
55 smarttech.com/kb/170642
55
56
57
57
59
59
60
60
62
63
65
66
66
67
69
69
71