Installing Smart Notebook Software; Running The Smart Connection Wizard - Smarttech SMART Board 6000 Series Administrator's Manual

CHAPTER 4
SETTING UP THE INTERACTIVE FLAT PANEL AND ROOM COMPUTER
Installing SMART Notebook software
Download and install SMART Notebook software on the room computer to take full advantage of
the interactive flat panel's features.
For more information, refer to the system administrator's guide for your operating system (see
SMART Notebook software installation documentation on page 10).
TIP
Your interactive flat panel includes one license of SMART Notebook software, which you can
install on the room computer. You can purchase additional licenses to install on guest laptops.
For more information, see smarttech.com/notebook.

Running the SMART Connection Wizard

After installing SMART Notebook software, run the SMART Connection Wizard to calibrate and
orient the interactive flat panel.
IMPORTANT
You must calibrate the interactive flat panel before using it.
To run the SMART Connection Wizard
1. Connect a keyboard and mouse to the room computer.
2. Access the SMART Connection Wizard by opening SMART Settings (see Opening SMART
Settings on page 29).
3. Click Connection Wizard.
The SMART Connection Wizard appears.
4. Select the interactive flat panel from the list of connected SMART interactive products, and
then click Next.
5. Select Product is being set up for the first time, and then click Next.
6. Follow the on-screen instructions to calibrate and orient the interactive flat panel for the
first time.
24 smarttech.com/kb/170642