Pens With Erasers - Smarttech SMART Board 6000 Series Administrator's Manual

CHAPTER 1
WELCOME
Indicator light Status
Solid amber DPMS (power management)
mode
Slowly flashing Standby mode
amber
Flashing amber No USB connection from the
connected computer
Slowly flashing SMART Board service not
white running on the connected
computer

Pens with erasers

The interactive flat panel comes with two pens with erasers attached.
The interactive flat panel's bottom frame includes magnetic holders for the pens. Removing a pen
from the holders activates it, and you can use it to draw or erase digital ink.
CAUTION
When you return the pen to the magnetic holder, make sure it's centered in its holder to keep it
from falling and being damaged.
4
This only applies when a computer is connected to the interactive flat panel's computer connectors.
7 smarttech.com/kb/170642
Troubleshooting
Press the Standby button
DPMS mode.
Connect an input source.
Press the Standby button
Standby mode.
If presence detection is enabled, move in
range of the presence detection sensor
(see page 49).
If wake-to-touch is enabled, touch the
screen (see page 51).
Verify the connections to the room
computer (see page 20).
Switch to the room computer's input
source (see page 25).
Ensure that SMART Product Drivers is
installed and that the SMART Board
4
service is running.
to exit
to exit