Cleaning And Maintaining The Interactive Flat Panel; Checking The Interactive Flat Panel Installation - Smarttech SMART Board 6000 Series Administrator's Manual

CHAPTER 5
MAINTAINING THE INTERACTIVE FLAT PANEL
7. Continue pressing targets until the second calibration screen and a grid appears.
An example appears briefly to demonstrate how to draw across the screen to calibrate the
interactive surface.
8. Use a pen to draw a spiral horizontally across the grid. As you draw, the ink is blue. As you
complete each square, the square becomes green.
9. When all the squares are green, a progress bar appears.
When the progress bar is full, the interactive flat panel displays the message
Calibration successful.
IMPORTANT
Wait until the calibration screen indicates that the interactive flat panel is operating correctly
before proceeding.
10. Orient the interactive flat panel (see Orienting the interactive flat panel on page 30).
Cleaning and maintaining the
interactive flat panel
With proper cleaning and maintenance, the SMART Board 6000 series interactive flat panel will
provide years of use.
Checking the interactive flat panel installation
Inspect the interactive flat panel installation frequently to ensure that it remains securely installed.
Check the mounting location for signs of damage or weakness that can occur over time.
l
Check for loose screws, gaps, distortions or other issues that could occur with the mounting
l
hardware.
If you find an issue, contact a professional installer.
32 smarttech.com/kb/170642