Orienting The Interactive Flat Panel - Smarttech SMART Board 6000 Series Administrator's Manual

CHAPTER 5
MAINTAINING THE INTERACTIVE FLAT PANEL
To open SMART Settings on Windows 8 operating system
1. Open the Apps screen.
2. Select SMART Technologies > SMART Settings.
SMART Settings appears.
To open SMART Settings on Windows 10 operating system
1. Select Start > All apps.
2. Select SMART Technologies > SMART Settings.
SMART Settings appears.
To open SMART Settings on OS X operating system software
1. Press the SMART Board icon
2. Press SMART Settings.
SMART Settings appears.
Orienting the interactive flat panel
If the interactive flat panel is connected to a computer and the pointer appears a distance from the
actual contact when you touch the screen, orient the interactive flat panel.
NOTE
You can use your finger or a pen to orient the interactive flat panel.
To orient the interactive flat panel when connected to a computer
1. Open SMART Settings (see Opening SMART Settings on the previous page).
2. Press Orient.
3. Press the red targets as they appear. Hold your finger or the tip of the pen at the center of
each target, and then lift the pen or finger. When you lift the pen or finger, the target moves to
the next orientation point.
IMPORTANT
Hold the pen at a right angle to the screen.
30 smarttech.com/kb/170642
on the Mac menu bar.