Chapter 5: Maintaining The Interactive Flat Panel; Resetting The Interactive Flat Panel - Smarttech SMART Board 6000 Series Administrator's Manual

Chapter 5
Maintaining the
interactive flat panel
Resetting the interactive flat panel
Updating firmware and software
Updating firmware
Updating SMART Notebook software
Using SMART Settings
Opening SMART Settings
Orienting the interactive flat panel
Calibrating the interactive flat panel
Cleaning and maintaining the interactive flat panel
Checking the interactive flat panel installation
Cleaning the screen
Cleaning the camera windows and reflective tape
Cleaning the presence detection sensor
Maintaining ventilation
Preventing condensation
Maintaining pens
Removing and transporting the interactive flat panel
Removing the interactive flat panel
Transporting the interactive flat panel
This chapter describes common maintenance procedures for the interactive flat panel.

Resetting the interactive flat panel

You can reset the SMART Board 6000 series interactive flat panel using the front control panel.
To reset the interactive flat panel
1. Press the Standby button
A message appears on the screen, prompting you to either press the button again to enter
Standby mode or press and hold the button to reset the interactive flat panel.
27 smarttech.com/kb/170642
on the front control panel.
27
28
28
29
29
29
30
31
32
32
33
33
34
34
35
35
35
35
36