Front Control Panel - Smarttech SMART Board 6000 Series Administrator's Manual

CHAPTER 1
WELCOME

Front control panel

The front control panel contains the Standby, Input Select, Mute and volume control buttons.
No. Name
1 Standby button
2 Input Select button
3
3 Mute button
4 Volume decrease
5 Volume increase
IMPORTANT
If there is a film over the front control panel, remove it before using the front control panel.
In normal operation, all buttons are white.
The Standby button also functions as an indicator light:
Indicator light Status
Solid white Normal operation
Off Not receiving power
1
Press and hold to reset the interactive flat panel
2
Change the input source to OPS/HDMI for the kapp iQ experience.
3
Press and hold to freeze and unfreeze the screen (SMART Board 6065-V2 and 6075 interactive flat panels only)
6 smarttech.com/kb/170642
1
2
Troubleshooting
[N/A]
Confirm the interactive flat panel's power
cable is connected to the power outlet
(see page 19).
Flick the power switch to the ON (I)
position (see page 23).